This post describes how to install Active Directory Certificate Services (ADCS) onto a domain controller. It’s for labbing purposes which means I’m going to run this all on a single server instead of a more realistic setup with offline root,
Adding DHCP Role to ISE Lab Domain Controller
In the previous post, Setting up Active Directory for ISE Lab, we enabled Active Directory Domain Services. The DNS role was also added automatically as part of this process. In this post, we’ll add DHCP to the server. Go to
How Do You Get Experience in IT?
A question I often get is, how do you get experience in IT? For people trying to break into this industry, what can they do to gain experience? How can they showcase that experience to a potential employer even if
Setting up Active Directory for ISE Lab
A key component of an ISE home lab is having Active Directory installed. In this post I’ll go through setting up basic AD for use with ISE. This post is not going to cover licensing. I’m assuming you are running
Building an ISE Homelab
One of the best ways of learning something is building a lab for it. Especially when it comes to complex topics like network authentication. When I started learning about network authentication and Cisco Identity Services Engine (ISE), I found that
Reclaiming Disk Space from Old Windows Install
This is a quick post to describe how to reclaim disk space being used by an old Windows install. Recently, I upgraded to Windows 11 from Windows 10. I noticed that I was starting to run a bit low on
NAT Overload Towards Specific Host
This is a quick post on how to perform NAT overload (PAT) towards a specific host only. I have an inside network of 10.10.1.0/24. I need a host in this network to reach the host 192.168.0.1. They don’t have direct
PMTUD in MPLS-enabled Networks
In the previous post on MSS, MSS Clamping, PMTUD, and MTU, we learned how PMTUD is performed by setting the Don’t fragment flag in the IP header which leads to the device that needs to perform fragmentation dropping the packet
MSS, MSS Clamping, PMTUD, and MTU
Maximum Segment Size (MSS) and MSS clamping are concepts that can be confusing. How do they relate to the MTU (Maximum Transmission Unit)? Before we setup a lab to demonstrate these concepts, let’s give some background. Note that this entire
Not All OSPF Inter-area Traffic Traverses Interfaces In Area 0
Everyone knows that OSPF is a link state protocol. Those that study also discover that OSPF behaves like distance vector between areas as Type-1- and Type-2 LSAs are not flooded between areas, but rather summarized in Type-3 LSAs. This means