While on IRC I had a request to describe my journey and the costs associated with becoming
a CCIE. Becoming a CCIE is not cheap but I’ve worked for great companies that have covered
all of my costs.

I first started studying for the written back in the summer of 2010. All my posts from back
then are still available in the archives. My strategy for the written was to build a strong
foundation to stand on beforing moving on to labs. I did not want to fast forward through
the written just to get on to the labs. Remember that the CCIE lab is about thinking at a
CCIE level, it is not about commands. You need to read for the CCIE, a lot! If you don’t like
reading then I’m sorry but this exam is not for you. I’ve probably read close to the
amount of someone becoming a doctor if I count the pages of everything I’ve read so far.
Here are some of the books that I read for the written and the costs associated with them:

Interconnections: Bridges, Routers, Switches, and Internetworking Protocols

TCP/IP Illustrated, Vol. 1: The Protocols

Internetworking with TCP/IP Vol.1: Principles, Protocols, and Architecture (4th Edition)

CCIE Routing and Switching Certification Guide (4th Edition)

Routing TCP/IP, Volume 1 (2nd Edition)

Routing TCP/IP, Volume II (CCIE Professional Development)

Developing IP Multicast Networks, Volume I

Sum of books for the written: 382$

In January of 2011 I went to take the written exam. The exam went good and I passed. It
was a bit different than the NP level exams but that was to be expected. The cost for
the written is 350$ Add that up with the cost of the books and you are looking at 732$
to get your ticket to the lab.

I needed to get some vendor workbooks and I decided to use INE due to their reputation and
instructors that were in place. I was able to pick up all the workbooks for something like
399$ on some deal.

I read Petr at INEs post on ( title=”How to study for CCIE lab v4″ target=”_blank”>how to study for the CCIE lab exam

I decided to use the 12 month program because I was in no hurry and time is scarce when
you have kids. Basically you start out with doing all the core labs like the essential
features of the routing protocols which makes up the core knowledge you must have before
starting to do the full scale Vol2 labs. I was able to do most of the labs in Dynamips.
I converted the INE configs to Dynamips with a sed script that I’ve shared on my site earlier.
If you look at IEOC (INEs forum) you can find a user called ( title=”IEOC relativitydrive” target=”_blank”>relativitydrive that has already
converted all the configs for you if you want to run Dynamips.

For the switching tasks you need to either rent a rack or to buy your own switches and hook
them up to your Dynamips topology. My UK friend Darren has a nice post on ( title=”Connecting switches to Dynamips topology” target=”_blank”>how to connect
switches to your Dynamips topology

I used rack rentals to practice the switching scenarios. I don’t know exactly how much I
spent on rentals but maybe around 500$

After I had done the Vol1 labs I started with Vol2. I was shocked, first of all the
diagrams and having to configure VLANs just from a diagram was a new experience for
me as for most. Also things like configuring OSPF which I felt pretty comfortable with
I could not even complete all those tasks. Expect to be crushed! Everything you thought
you knew will be put to test. CCIE is a whole different level than most of us are used
to so keep your head up even though you will be crushed the first couple of times you
do a Vol2 lab.

There are a few different ways you can do a Vol2 type lab. Either you do all the tasks
you think you can solve in one run and then you come back and look at the things you
could not solve. Or you do the tasks you can and then you peak at the SG for the
things that you could not solve yourself. You need to find what works best for you but
don’t be too worried about speed in the beginning. That will come in time, trust me.
What you should do straight away is abandon Google, no more Google for you my friend!
To find anything you want to reference you need to go to the DOCCD. You will eat, drink
and breathe the DOCCD until you pass the lab so get used to it πŸ™‚ Basically you will
be going to the IOS 12.4T section or to the 3560 switches. The DOCCD is located ( title=”DOCCD” target=”_blank”>here.
INE has a ( title=”INE – How to use the DOCCD” target=”_blank”>free Vseminar on how to use the DOCCD.

Some people see the written and the lab as two entirely different beasts. I don’t think about
it that way because you are still working towards an end goal and that is to become a CCIE.
What you don’t want to do is stop reading just because you are labbing. You need to do
both. Don’t forget to use the RFC as sources, they are a resource you should tap into.
I can’t remember everyone that I read but these are some major ones.

RFC 791 – Internet Protocol
RFC 826 – An Ethernet Address Resolution Protocol
RFC 2328 – OSPF version 2
RFC 4271 – A Border Gateway Protocol 4 (BGP-4)
RFC 3031 – Multiprotocol Label Switching Architecture
RFC 4594 – Configuration Guidelines for DiffServ Service Classes
RFC 4577 – OSPF as the Provider/Customer Edge Protocol for BGP/MPLS IP Virtual Private Networks (VPNs)

This is a free resource and the RFCs are written by some of the smartest people in
the industry so don’t forget to use them.

If you decide to go for INE then don’t forget to use IEOC which is the
user community (forum) where you can ask questions about labs and most of what you
want to ask will already have been asked by someone previously. You will probably
find my face on a lot of threads in there πŸ™‚

When you do Vol2 labs don’t be too strict about grading yourself. Your solution can be just as
valid as long as you don’t break any restrictions. Also try to get into the habit of doing
alternate solutions and throw some extra stuff in there to make you think a bit more. When
you start a lab you should not start typing immieditaly. Read through the entire lab and
look for dependencies. Do you need to run IPv6 on 3560? Might as well change the SDM
profile and reload at once. You don’t really want to reload when you have a stable
topology. While the switches are reloading you can do your VLAN config in Notepad or
something else. The CCIE lab is about being smart and effective, typing fast helps
but is not necessary to pass the lab.

Troubleshooting is a big part of the CCIE lab. You have a 2h session with just
troubleshooting and expect to at least mess something up during your config section
as well. Many people ask: How do I learn troubleshooting? The answer is: You don’t!
You can’t just practice troubleshooting like it was a separate skill. You need to
know the protocols! In some ways the troubleshooting is more difficult because you
already have a network running and you must understand what is going on in it.
You need to use the right tools and you need to know how the output looks like.
Sometimes you might have to match output to get something correct.

INE has some cool stuff coming up with their new TS racks. Other than that
I recommend that you make troubleshooting something you do regularly.
If you get stuck on something try to figure it out by yourself first and
use the proper tools before looking for a simple solution. What I did before my
2nd lab attempt was to configure a lof of different technologies like OSPF, EIGRP,
MPLS, BGP, Multicast etc etc. I made a working topology, this in itself is
good practice. If you can’t configure a topology without someone holding your hand
then your are not ready. Then I would try to break things and looked at what happened.
For MPLS, what happens if you disable CEF? What happens when you have a duplicate RID
in OSPF? Is the behaviour the same when you are running EIGRP? This worked very well
for me and for my last 2 attempts I had no issues with the TS section.
Always remember that the network was functioning and then something was altered
to make it break. You need to solve the core issue and not work around the issue.

As I mentioned earlier you don’t want to stop reading books just because you are labbing.
Here are some of the books I read for lab preparation:

OSPF: Anatomy of an Internet Routing Protocol

QOS-Enabled Networks: Tools and Foundations

Practical BGP

Interdomain Multicast Routing: Practical Juniper Networks and Cisco Systems Solutions

MPLS-Enabled Applications: Emerging Developments and New Technologies

So that is another 268$ of books. Now I did not actually buy all these books. I got a Safari
account as well which is really nice. It costs a bit but then you have all the books you need.

Every lab attempt costs around 1800$ I need to go fly to Brussels and spend one night there.
Flying usually costs around 500$ Room for a night maybe 250$ Then you need to eat
something and maybe get a cab etc. So each attempt costs around 2600$

I passed in my 3rd attempt so that is 2600$ * 3 = 7800$

If we sum it all together:

Books 650$
Written exam 350$
Workbooks 399$
Rack rental 500$
3x lab attempts 7800$

Sum: 9699$

I did not include the bootcamp in this since I consider that
optional. But everyone needs books/workbooks and of course to take the tests. If you
live nearer a testing center you can save some on the lab attempts. Hopefully you can
pass in your first or second attempt but the average is somewhere around two to four
attempts before passing. So before starting your journey you should budget for 10-15k
to earn your CCIE. Hopefully if you are lucky as I have been your employer will fund
some/all of the costs but that is no given.

Finally, there is really no way of knowing when you are ready to go to the lab except
for going to the lab and finding out. Mock labs will give you some rough guidance
but it’s not 100% accuracte because you can never simulate the stress fully. What
I do recommend is that you try to get as comfortable as possibly by simulating the
test environment. Practice using only one monitor, use PuTTY, use a US keyboard.
Check out the lab exam demo before you go to the lab. Anything that can help
easen the stress a bit on the lab day will be good.

I hope this post gave you some insight to studying and that becoming a CCIE is
indeed expensive. Hopefully it is all worth it in the end πŸ™‚

Becoming a CCIE – the path and cost associated to my number
Tagged on:                         

40 thoughts on “Becoming a CCIE – the path and cost associated to my number

  • November 2, 2012 at 6:15 pm

    Invaluable information for someone like me, currently working to pass the written. Posts like this really fuel my fire. Can’t wait to start labbing!

    • November 2, 2012 at 11:49 pm

      Great to hear. I’ll be following you πŸ™‚ Don’t be afraid to ask if you need any input on the studying.

  • November 2, 2012 at 6:45 pm

    Nice writeup…me and my colleague did spent the same amount of money but with a Bootcamp included. In two weeks we will have our first attempts, but I think we are prepared quite well. We also used INE Workbooks which are awesome. Well, I can tell you in a bit how it worked πŸ™‚

    • November 2, 2012 at 11:49 pm


      Hope to get a success story from you soon then πŸ™‚

  • November 2, 2012 at 8:35 pm

    Hello Daneil, my congratulations!

    Can you tell about, how much time did it get to become CCIE? How did you handle your daily work?

    Thanks, Serik

    • November 2, 2012 at 11:51 pm

      Hi Serik,

      It took me roughly 2 years to become a CCIE. I think I spent somewhere around 1500h in total. I worked full time and studied in the evenings when the kids were sleeping. So you have to be really motivated but it is doable!

    • November 2, 2012 at 11:53 pm

      I started preparing for the CCIE this February. Did the written in march. You should have at least 500 hours in labbing time before you go to the lab the first time. I did practice almost every day since February…

    • November 2, 2012 at 11:52 pm

      That’s good to hear that we seem to have about the same estimation of things πŸ™‚

  • November 2, 2012 at 11:54 pm

    Thanks excelent post …. congratulation for your CCIE.

  • November 3, 2012 at 6:41 pm

    Valuable post and congrats again. Hope the sed script can be used for ine vol 3 configs, bcos what I am basically doing now is focusing on core topics and that’s what vol 3 covers basically though it use meant for speed.

  • November 3, 2012 at 10:38 pm

    Hi Daniel.

    I am not working in networking field (yet) so maybe my question will sound naive but still I wonder if you get opportunity to solve CCIE level problems while working in your company. I mean, if you (an experienced engineer) had to do so many labs in the evenings to prepare for the exam then maybe it means that your current job does not provide opportunities to troubleshoot network issues covered in CCIE?

    I heard once that CCIE labs are so complex that one rarely or almost never encounter such network problems in real world. What is your opinion about this statement?

    • November 3, 2012 at 10:59 pm

      I also think that the lab has almost nothing to do with the real world…almost all the time the best practice solution is forbidden in the lab. The lab is about knowing all the solutions to a problem, so you need to learn to think on a different level. But it is always good to know more solutions to one problem…

    • November 3, 2012 at 11:50 pm

      Real life is a bit different from the lab. In real life you have no restrictions how to solve things and usually you have colleagues and others to discuss with. Also even if you have stress for time it’s not like the clock is ticking when you are working at your job.

      So in real life it might be enough to know one solution to something but for the CCIE you need to know multiple because you might be restricted in what you are allowed to use.

      Even if I don’t run into the same scenarios in real life it still helps having done all the labs. You learn how to think when solving issues and you have a good
      feeling for packet flow. In one way it’s like training for the olympics and right now I am probably at my peak. I will become a better engineer the more experience I become but I will probably not be as fast and know that much configuration that I do right know.

  • November 4, 2012 at 10:14 am

    Nice write up, Daniel. You motivate a lot of people. Thank you for that.

    • November 4, 2012 at 10:42 am

      Thanks. I am glad to hear that πŸ™‚

      Are you studying right now?

      • November 4, 2012 at 11:00 am

        Yes, i am. Taking the written on 14th of december. πŸ™‚

  • November 4, 2012 at 1:02 pm

    Hi Daniel, great sum up and also an awesome blog at all.
    I am currently preparing for the written. Will do it before the end of the year.

    I have nearly the same prerequisites like you, since I also have children (2) and have to take my Lab in Brussels (Im Austrian).
    Learning in the evening after the kids are in bed is really quite hard, but guys like you give an extra portion of motivation ;-).

    Congrats again for you number!

    • November 4, 2012 at 5:48 pm

      Hi Norbert,

      Thanks for the kind words πŸ™‚ I am glad that I can be a motivation for you. Studying with kids is possible but a bit tougher. Feel free to contact me if you need any advice. Keep reading the blog and good luck with the written!

  • November 5, 2012 at 1:33 am

    Hey Daniel,
    Sorry, i wasn’t reading your blog for time long enough to read about your first 2 attempts but can you tell how close you were to passing score the other two times?

    • November 5, 2012 at 7:17 am

      The first time I passed neither section. Second time I passed TS but failed the config.

      I thought I might have had enough to pass config on both attempts but did not. As I passed on my 3rd attempt I realized that the difference was verification. You must verify everything otherwise you will lose minor points very fast.

  • November 10, 2012 at 12:41 am

    Congrats, it was a huge investment and great achivement, Congrats Daniel.

    I am new to this forum, I passed my written 2 weeks ago and started preparing the lab. I downloaded the .net files from http://www.routergods.com/files/grand-unified-ine-gns3.zip for INE lab and try to start from Frame Relay Lab, but it seems everything is pre-configured when I look at the device configuration files. My question is, is this only for L3 labs?

    For an example I opened the R1.cfg file from fulllayer2 lab and I saw FR is configured on Serial0/0.1 point-to-point link, but task 2.2 on INE WB VOL1 asking to configure FR as per the diagram which is S0/0 int, it’s confusing me. Please give me some idea how to use this initial config files for INE Worbooks.

    I thing you guys can help me, specially reaper81 πŸ™‚

    • November 10, 2012 at 8:49 am

      When doing the frame relay lab you should start with a blank config.

      Loading full layer 2 means that all of the layer 2 has already been done for you.

  • November 10, 2012 at 9:17 pm

    Thanks Daniel, I got it now. I will contact you if I need any help.

  • Pingback:Attacking the CCIE in 2013. Need some strategy advice...

  • Pingback:CCIE #38620 – My story | Route Reflector

  • November 4, 2013 at 9:31 pm

    Thinking to set sail on the same journey and this post is really helpful. Gives a good idea of the number of hours involved plus costs associated. Well done for the achievement and for sharing it with others.

  • January 14, 2014 at 7:49 am

    I want to start preparing for written and then for lab … Can you please guide me or become my mentor on how to proceed please .

    • January 17, 2014 at 10:53 pm

      Start by making a plan for the written. Which books you want to read and approximately how long time it should take. Before taking the written practice on questions in the Certification guide and maybe get Boson to get some extra practice.

  • March 3, 2014 at 3:51 pm

    Nice!…Thank you dear author

  • July 25, 2014 at 6:13 pm

    Hi..I really appreciate the courage you took to study up to this level.
    Me too planning to get there.

  • August 7, 2014 at 11:04 pm

    that was amazing describe you make us feel like we was with you πŸ™‚
    i am currently in My CCIE Written journey it has been about two months since i start studying .. i indeed look to the Written and LAB as one Exam and i will take the Written when i reach a new level of knowledge.
    the only problem that i face is that i have weak memory πŸ™ which make me forget things that i work so hard to understand and memorize so fast πŸ™ which make me sad some time BUT i will not surrender πŸ˜‰
    Thanks a lot

  • December 23, 2014 at 4:46 pm

    Tahnks for your valuable informations .


Leave a Reply to reaper81 Cancel reply

Your email address will not be published. Required fields are marked *